AustralianValve

  Australian Valve is a leading Check Valve Manufacturer in Australia . A check valve is a type of valve that only allows fluid (liquid or gas) to flow in one direction and prevents reverse flow. It is designed to maintain the unidirectional flow of the fluid and automatically stop reverse flow, without the need for manual intervention. The valve works by using a spring-loaded disc or ball that closes against a seat when reverse flow is detected, effectively stopping the flow of fluid. Check valves are commonly used in piping systems to protect equipment, maintain process flow, and prevent backflow into the supply lines. Australian Valve is a major Check Valve Manufacturer in Australia , supplying to Queensland, Western Australia and Melbourne. Parts 1.Body 2.Disc 3.Spring 4.Seat 5.Inlet and Outlet 6.Direction of flow Types 1.Swing check valve 2.Wafer check valve 3.Ball check valve 4.Lift check valve 5.Dual plate check valve 6.Silent check valve 7.Non slam swing check valve 8.Tilti...

  Australian Valve is the dominant Direct Acting Pressure Reducing Valve Manufacturer in Australia . We supply to cities like Geraldton, Toowoomba, Dubbo. A direct acting pressure reducing valve (PRV) is a type of valve that is used to regulate the pressure of fluids in a piping system. It works by reducing the pressure of the fluid downstream of the valve to a set point, which is determined by the position of the valve's spring and the force of the fluid acting on the valve. The valve body is typically made of brass, stainless steel, or other materials that are resistant to corrosion and wear. The valve seat and disc are made of materials that are compatible with the fluid being controlled. The spring is located inside the valve body and provides the force needed to keep the valve disc in the closed position. As the pressure of the fluid upstream of the valve increases, the force of the fluid acting on the valve disc also increases, causing the valve to open and allow the fluid to...

  Australian valve is the best Non Slam Swing Check Valve Manufacturer in Australia . We supply to cities like Coffs Harbour, Mildura, Bendigo. A non-slam swing check valve is a type of industrial valve that is commonly used to prevent backflow and protect pipeline systems from damage. This valve operates using a swinging disc that moves in response to changes in fluid pressure, and is designed to close quickly and prevent slamming or water hammer.The working principle of a non-slam swing check valve is based on the flow of fluids through the pipeline. The valve is designed to allow the fluid to flow in one direction and prevent backflow in the opposite direction. The valve consists of a disc that is mounted on a hinge or shaft. The disc swings open and closed in response to changes in fluid pressure. When the fluid flows in the desired direction, the disc opens and allows the fluid to pass through the valve. When the fluid flow stops, the disc swings back into its closed posi...

  Australian Valve is the largest Emergency cut off valve manufacturer in Australia . We supply to cities like Sydney, Bendigo, Coffs Harbour. An emergency cut-off valve, also known as an emergency shut-off valve, is a critical safety device used in various industrial, commercial, and residential applications to quickly and easily shut off the flow of fluid in an emergency situation. Emergency cut-off valves are typically installed in pipelines, fuel tanks, gas lines, and other systems where a sudden loss of pressure or leak could cause significant damage or harm. These valves can be manually operated or triggered automatically in the event of an emergency, allowing users to quickly stop the flow of fluid and prevent further damage. Australian valve is the premium Emergency cut off valve manufacturer in Australia and these valves have high performance and very safe to use. Advantages of emergency cut off valves include: Safety: Emergency cut-off valves provide a qui...